CATALOG OF CONSUMER GOODS
KEY TECHNOLOGIES FOR CONSUMER GOODS PRODUCTION
TESTING FACILITIES
ENGINEERING DEPARTMENT
MAINTENANCE
AWARDS
MARKETING
OFFER OF SERVICES
 
 
homepage
PRODUCTION OF CONSUMER GOODS
OFFER OF SERVICES

russian
   

Engineering Department of the consumer goods manufacture, which has acquired a broad experience in starting mass production of such products as vacuum cleaners, food processors, mulitmixers and the like, can offer the following engineering services:

  1. Marketing research on the customer-specified goods
  2. Studies of consumer and technical characteristics of the customer- provided commodity samples. The studies are conducted on the basis of laboratories and stands available at the enterprise.
  3. Development of article design based upon customer's input data, including generation of a 3D-Model of an article and creation of design-mock-up by 3D-Model using quick prototyping methods.
  4. Generation of design documentation and 3D-Model of the parts and article as a whole guided by Customer's Technical Specification with the process inspection of the development based upon Customer's or ZEM's manufacturing conditions.
  5. Customer's design documentation updating to suit the conditions of specitic or ZEM mass or full-scale production.
  6. Production of dimensional mock-ups of articles by quick prototyping methods to check theix assembly capability and operation.
  7. Production of pilot lot of articles by quick prototyping methods with no preproduction.
  8. Analysis of Customer's design documentation for manufacturability and development of the manufacturing process to suit specific or ZEM-based production.
  9. Drawing up the specifications for equipment and production tooling, including dies and molds, for ZEM-based or other production.
  10. Equipment and tooling order, process inspection and acceptance to suit Customer's needs.
Our developments
Our developments
Our developments
Our developments
Our developments
 

The work is carried out within the PRO Engineer system, including the following modules: Sheet Metal for sheet forming; Plastic Adviser for spillage control of plastic parts; PRO/Mechanica for dynamic, kinematic and Strength analysis; the module for composite surfaces design. The developments to reduce time are being carried out under a single Project using the PRO/Intralink.

Telephone: 513-68-48; fax: 513-68-45
E-mail: Boris.Harlov@rsce.ru

 

 

 

 

 

Official WEB-site of S.P.Korolev RSC Energia
E-mail:mail@rsce.ru