Production of Electric Transport Vehicles, Motor-wheels and Super Condensers
Electric Transport Vehicles
Electrically driven road wheeled chair KAR-10
Our Company has mastered serial production of KAR-10, electrically driven road wheeled chair in the following modifications:
- ride wheeled chair;
- ride wheeled chair with a top;
- wheeled chair for cargo transportation.
- Drive rear wheels with electrical motor-wheel built in the hub;
- Snubbers of front and rear wheels;
- Control from a throttle grip;
- Electromagnetic safety brake;
- Traction battery as a power source.
| Technical characteristics |
Overall dimensions, mm |
1600x710 x1280 |
Wheel track spacing, mm |
700 |
Maximal velocity, km/h |
12 |
2-level speed regulation, km/h |
0-6 / 0-12 |
Cruising range (without recharging), km |
80 |
Power source voltage, V |
36 |
Climb, % |
10 |
Mass without a driver and cargo, kg |
160 |
Capacity, kg |
100 |
Ride wheeled chair

| Technical characteristics |
Maximal velocity, km/h |
25 |
2-level speed regulation, km/h |
0-6 / 0-12 |
Cruising range (without recharging), km |
60 |
Power source voltage, V |
36 |
Climb, % |
10 |
Capacity, kg |
80 |
Wheeled chair for cargo transportation

- tow hook;
- cargo trailer;
- mechanical shoe brake (optional).
  
Electric Cargo Truck EGT 1
Our Company has developed and mastered serial production
of Electric Cargo Truck EGT 1 powered by supercondenser
bank.
Ecology clean transport
- No noise
- Continuous, up to 22 hours per a day, readiness for operation: charging time of vehicle-born condenser
source is 10 times less then charging time of traditional battery.
- Increased maneuverability: pivot turn with drive wheels rotation in opposite directions
- Reduced power consumption: high efficiency, recuperation of energy from motor-wheels to power source.
- Rear drive wheels, direct drive by means of electric motor built in the motor-wheels hub.
- Transistor control system with pulse-width modulation.
- Pneumatic tyre, vehicle-born charging device
- Truck trailer can be used with a capacity of 250 kg.
- The truck is intended for use in assembly shops, within rooms of custom terminals, for small cargoes delivery
in distributive tarde, within rooms and household services, recreation areas.
  
| Technical Characteristics |
Maximal velocity, km/h |
12 |
Cruising range at a full mass without recharging/with the trailer, km |
30/40 |
Vehicle-born power source |
Supercondenser bank |
Vehicle-born source charging time, hr |
1 |
Operating voltage of traction electric equipment, V |
42 |
Electric drive power, kW |
1,4 |
Brake system:
- operating brake
- parking brake |
Electrodynamic braking and shoe brakes of rear wheels
Shoe brakes of rear wheels |
Climb, % |
10 |
Capacity (without driver's weight), kg |
250/500 |
Unladen mass, kg |
390 |
Overall dimensions, mm
- cargo platform length
- cargo platform width
- cargo platform height |
1200
1050
650
|
Rear track, mm |
865 |
Unladen mass of trailer, kg |
130 |
Overall dimensions of trailer, mm
- length
- width
- height |
1200
1050
650 |
Trailer wheels spacing, mm |
865 |
Turning radius, mm |
1700 |
|
News Archive
 |
May 2012 |
|
| Mon | Tue | Wed | Thu | Fri | Sat | Sun |
| |
1 |
2 |
3 |
4 |
5 |
6 |
| 7 |
8 |
9 |
10 |
11 |
12 |
13 |
| 14 |
15 |
16 |
17 |
18 |
19 |
20 |
| 21 |
22 |
23 |
24 |
25 |
26 |
27 |
| 28 |
29 |
30 |
31 |
|
|
|
| |
|